Dansk
Svenska
Nederlands
Deutsch
English
Apache 4All XT multibrand remote control 433 and 868 Mhz, auch für Aprimatic TS2 305 MHz!
Preis und Verfügbarkeit
SKU: 34009301Verfügbarkeit: Ersetzt durch neues Modell
Dieses Produkt wurde ersetzt durch:Apache 4All XP Universal-Handsender, für fest- und rolling-Code
Beschreibung
Dieses Produkt wurde ersetzt durch: Apache 4All XP Universal-Handsender, für fest- und rolling-Code.
Apache 4All XT remote control permit to duplicate original remote controls operating in the frequencies 433.92 MHz, 868.3 MHz and inside the bands 290-365MHz and 385-400 MHz.
For every button you can learn a remote control operating in one of the frequencies above; every button is managed in a independent way.
For example you can duplicate 868 MHz HORMANN on button 1, 310MHz LINEAR on button 2, 390MHz GENIE on button 3 and 433MHz CAME on button 4.
Apache 4All offers an extremely high frequency stability, due to its crystal reference, and the highest grade of user friendly because there are no dip switches, jumpers or trimmers: the device should be opened only to change battery.
CHARACTERISTICS
- Power supply: 3V CR2032 standard battery, with about 5 years life
- Buttons: 4, each button can be associated to a different original remote
- Operating Frequency: 433.92, 868.3 and every frequency in the bands 290-365 MHz and 385-400 MHz
- Frequency synthesizer: PLL, with stability better than 50 ppm
- Range: It depends by the receiver sensitivity, antenna and topology, typically:
90m (270ft) at 433.92 MHz
45m (135ft) at 868.3 MHz
60m (180ft) at 290-400MHz
- Learning mode: Original code is learned automatically, notifying the result through the LED
- Frequency learning: manual or automatic
- Storage: Each code is stored into non-volatile memory, so it is retained during battery replacement
- Low battery detection: Battery voltage is controlled before every transmission. Battery status is notified using led.
- Dimensions: 55x29mm, height between 7 and 11mm
- Weight: 14g
Compatible with: ADYX, ALLMATIC, ALLISTER, ALLSTAR, APRIMATIC, AVIDSEN, BANDY, BENINCA, BFT, CAME, CARDIN, CARPER, CASALI, CASIT, CELINSA, CENTURION, CPS, CRAWFORD, DASPI, DEA, DELMA, DICKERT, DIGICODE, DITEC, DOITRAND, DUCATI, ELBE, ELCA, ELEK, FAAC, FADINI, FERPORT, GENIE, GIBIDI, GOBBATO, GULLIVER, HORMANN, HRC, IUPPITER, JAY, KING, LABEL, LEB, LINCE, LINEAR, MA, MARANTEC, MONSEIGNEUR, NICE, NOLOGO, NORMSTAHL, NOVOTECHNICA, OG, OPENOUT, PRASTEL, PROGET, PROTECO, PUJOL, PULSAR, QUASAR, RADIODIGIT, SEA, SEAV, SECURVERA, SERAI, SICE, SOMFY, STAGNOLI, STANLEY, STARTEC, TAU, TECH KEY, TEDSEN, TELCOMA, TCK, TORAG, TORMATIC, V2, WECLA.
Please check complete list for compability.
Also visit http://www.apache4all.com for more info.
Apache 4All XT remote control permit to duplicate original remote controls operating in the frequencies 433.92 MHz, 868.3 MHz and inside the bands 290-365MHz and 385-400 MHz.
For every button you can learn a remote control operating in one of the frequencies above; every button is managed in a independent way.
For example you can duplicate 868 MHz HORMANN on button 1, 310MHz LINEAR on button 2, 390MHz GENIE on button 3 and 433MHz CAME on button 4.
Apache 4All offers an extremely high frequency stability, due to its crystal reference, and the highest grade of user friendly because there are no dip switches, jumpers or trimmers: the device should be opened only to change battery.
CHARACTERISTICS
- Power supply: 3V CR2032 standard battery, with about 5 years life
- Buttons: 4, each button can be associated to a different original remote
- Operating Frequency: 433.92, 868.3 and every frequency in the bands 290-365 MHz and 385-400 MHz
- Frequency synthesizer: PLL, with stability better than 50 ppm
- Range: It depends by the receiver sensitivity, antenna and topology, typically:
90m (270ft) at 433.92 MHz
45m (135ft) at 868.3 MHz
60m (180ft) at 290-400MHz
- Learning mode: Original code is learned automatically, notifying the result through the LED
- Frequency learning: manual or automatic
- Storage: Each code is stored into non-volatile memory, so it is retained during battery replacement
- Low battery detection: Battery voltage is controlled before every transmission. Battery status is notified using led.
- Dimensions: 55x29mm, height between 7 and 11mm
- Weight: 14g
Compatible with: ADYX, ALLMATIC, ALLISTER, ALLSTAR, APRIMATIC, AVIDSEN, BANDY, BENINCA, BFT, CAME, CARDIN, CARPER, CASALI, CASIT, CELINSA, CENTURION, CPS, CRAWFORD, DASPI, DEA, DELMA, DICKERT, DIGICODE, DITEC, DOITRAND, DUCATI, ELBE, ELCA, ELEK, FAAC, FADINI, FERPORT, GENIE, GIBIDI, GOBBATO, GULLIVER, HORMANN, HRC, IUPPITER, JAY, KING, LABEL, LEB, LINCE, LINEAR, MA, MARANTEC, MONSEIGNEUR, NICE, NOLOGO, NORMSTAHL, NOVOTECHNICA, OG, OPENOUT, PRASTEL, PROGET, PROTECO, PUJOL, PULSAR, QUASAR, RADIODIGIT, SEA, SEAV, SECURVERA, SERAI, SICE, SOMFY, STAGNOLI, STANLEY, STARTEC, TAU, TECH KEY, TEDSEN, TELCOMA, TCK, TORAG, TORMATIC, V2, WECLA.
Please check complete list for compability.
Also visit http://www.apache4all.com for more info.
Spezifikationen
| Abmessungen (L x B x H) | 49 x 29 x 11 mm |
